Izberi državo za dostavo naročila

Shanling UA4 Hi-Fi Ojačevalniki za slušalke Titanium

5/5

Koda izdelka: 1143224

Shanling UA4 Hi-Fi Ojačevalniki za slušalke Titanium
5/5

Koda izdelka: 1143224

106,61 € s kodo MUZMUZ-5
113 €
Na zalogi 2 kos
Hi-Fi Ojačevalniki za slušalke Shanling UA4 Hi-Fi Ojačevalniki za slušalke Titanium

Shanling UA4 Hi-Fi Ojačevalniki za slušalke Titanium

113 €
Oglej si te cenovno ugodne alternative. Morda te bo zanimalo:
UA4 ima vrhunski DAC ES9069Q podjetja ESS Sabre Technologies. Ta 32-bitni visokozmogljivi DAC ponuja odlično zvočno dekodiranje z nizkim popačenjem in visokim SNR ter podpira do 32-bitne/768 kHz PCM in izvorne zvočne signale DSD512. UA4, opremljen z dvojnimi ojačevalnimi čipi RT6863, zagotavlja robusten izhod, ki zagotavlja do 211 mW pri 32 Ω....
  • Frekvenčni razpon: 20 Hz - 40 kHz
  • Frekvenca vzorčenja: 768 kHz / 32 bit
  • Razmerje signal/šum: 120 dB
  • Bluetooth: Ne

Shanling UA4 Hi-Fi Ojačevalniki za slušalke Titanium

To je samodejni prevod s programsko opremo:

UA4 ima vrhunski DAC ES9069Q podjetja ESS Sabre Technologies. Ta 32-bitni visokozmogljivi DAC ponuja odlično zvočno dekodiranje z nizkim popačenjem in visokim SNR ter podpira do 32-bitne/768 kHz PCM in izvorne zvočne signale DSD512. UA4, opremljen z dvojnimi ojačevalnimi čipi RT6863, zagotavlja robusten izhod, ki zagotavlja do 211 mW pri 32 Ω. UA4 se ponaša z elegantnim dizajnom in vključuje fizične tipke za nadzor glasnosti in predvajanja. Vključuje vgrajen zaslon, ki prikazuje informacije, kot so bitna hitrost, raven glasnosti in druge nastavitve. UA4 je zasnovan za prilagodljivost in ponuja dvojne vtičnice za slušalke. Vključuje standardni enojni 3,5 mm izhod in uravnotežen 4,4 mm izhod za slušalke. Podpira načina UAC 2.0 in UAC 1.0, kar zagotavlja enostavno povezljivost s sistemi Windows, Mac, Android in iOS.

Nadaljnji opis v tvojem jeziku še ni na voljo. Mogoče bo koristen opis v angleškem jeziku.

Shanling UA4 Titanium — Portable DAC/AMP with ES9069Q Sabre Decoding

\n

This model is a pocket-sized USB dongle DAC and headphone amplifier that brings desktop-grade decoding to a phone or laptop. Built around the new fourth-generation ESS ES9069Q Sabre DAC chip, it supports 32-bit/768 kHz PCM, native DSD512, and MQA 16x rendering. Weighing roughly 20–25 g, the titanium-finished aluminum chassis slips behind a phone without adding noticeable bulk. The Shanling UA4 Titanium is the right choice for IEM and portable-headphone users who want reference-level decoding without carrying a full desktop stack.

\n

What makes this device different from other dongle DACs

\n

Most dongle DACs in this price band rely on older ESS chips; the UA4 is among the first to ship with the new ES9069Q, which improves time-domain performance and reduces power draw. Six Kemet-brand 100 µF tantalum capacitors and ultra-low-noise LDOs sit on the audio PCB, giving the unit a notably black background free of hiss. A 22 mm OLED screen with three physical buttons is rare at this tier and lets users change gain, filter, and volume without touching the host device.

\n

ES9069Q DAC architecture — clean, low-jitter signal chain

\n

The DAC stage is the heart of any portable amp, and the ES9069Q brings Hyperstream IV modulation and programmable FIR filters to a dongle form factor. This translates into a 120 dB THD+N rating and stable decoding of high-resolution audio without breaking up on multichannel sources.

\n
  • The DAC features ESS ES9069Q Sabre architecture with Hyperstream IV modulation.
  • PCM Decoding: 32-bit / 768 kHz — full coverage of studio-master resolutions
  • DSD Decoding: Native DSD512 — bit-perfect playback of DSD256 and DSD512 files
  • MQA Rendering — 16x full hardware unfold, with the verified MQA logo appearing on the OLED when active
  • \n
\n

RT6863 dual-amp stage — 227 mW balanced drive

\n

The headphone amplifier section determines whether a dongle can drive demanding IEMs and over-ear headphones. Two independent Ricore RT6863 op-amps feed both the single-ended and balanced outputs, with separate voltage rails for clean channel separation.

\n
  • Amplifier Chips: 2× Ricore RT6863 — dual-independent configuration for balanced drive
  • Balanced Output (4.4 mm): 227 mW @ 32 Ω, 4 Vrms — drives most full-size portable headphones
  • Single-Ended Output (3.5 mm): 137 mW @ 32 Ω, 2 Vrms — clean signal for sensitive IEMs
  • \n
\n

Titanium chassis, OLED menu, and cross-platform support

\n

A dongle DAC lives or dies by its physical design and host compatibility. The anodized aluminum shell resists scratches, while the OLED screen and three-button layout remove the need to dig into companion apps for basic adjustments.

\n
  • Chassis: Machined aluminum with anodized titanium finish — weighs roughly 20–25 g
  • Display — 22 mm monochrome OLED showing active bitrate, volume, gain, and filter at a glance
  • USB Modes: UAC 1.0 / UAC 2.0 dual mode — plug-and-play with Nintendo Switch and gaming consoles
  • OS Support: Android, iOS, Windows, Mac — Eddict Player app for deeper configuration
  • \n
\n

For IEM listeners and portable-headphone users seeking reference decoding

\n

Commuters and studio engineers who own high-quality IEMs or efficient portable headphones will find this device allows them to bypass the mediocre DAC stage inside a phone or laptop. It decodes MQA, DSD, and high-bitrate PCM without draining the host battery. Players using sensitive multi-BA IEMs will appreciate the dark background and low-noise floor, while those with harder-to-drive planar headphones gain usable headroom from the 4.4 mm balanced output.

\n

Shanling — over 35 years of high-fidelity craftsmanship

\n

Shanling was founded in 1988 and has built a reputation for high-fidelity audio products ranging from classic CD players and tube amplifiers to modern portable players and dongle DACs. The UA series represents the brand's portable USB DAC/AMP lineup, with this model sitting between the entry-level UA1/UA2 and the flagship UA5. By adopting the new ES9069Q chip early, the manufacturer positions this product as a reference point within its own dongle family.

",description_sk:

Primerno za

Tip

DA Converter, Ojačevalnik za slušalke

Kompatibilen z

Android, iOS

Funkcije

Število izhodov

2

THD

0,0008%

Kontrole

Play, Pause, Next, Previous

WiFi

Ne

Bluetooth

Ne

DA Conversion

Da

Mikrofon

Ne

MIDI interface

Ne

Lastnosti

Barva

Siva

Frekvenčni razpon

20 Hz - 40 kHz

Impedanca

32 Ohm

Frekvenca vzorčenja

768 kHz / 32 bit

Razmerje signal/šum

120 dB

Zaslon

Da

Vhodi in izhodi

Vhodi

USB-C

USB

Da

Vhod za mikrofon

Ne

Analogni vhodi

Ne

Analogni izhodi

Ne

Izhod za slušalke

Da (2)

Konektorji

Konektor tipa A

USB C

Pakiranje

Vsebina paketa

USB Cable, Manual

Napajanje

Možnost delovanja na baterijo

Ne

Napajanje

USB-C

Dodatki

Adapter priložen

Ne

Mere in teža

Višina (cm)

6

Širina (cm)

2,5

Globina (cm)

1,1

Teža (g)

20,8

Država

Država izvora

Kitajska

Glede na število ocen: 1

Ocena izdelka s strani strank

Vse ocene prihajajo od preverjenih strank, ki so v preteklosti že kupile izdelek pri nas.

Dokumenti

Navodila za uporabo
Varnostna navodila

Ustrezna varnostna navodila za izdelek glej navodila za uporabo.