Behringer HA6000 Ojačevalnik za slušalke

Behringer HA6000 — 6-Channel Headphone Amplifier for Studio and Stage

The Behringer HA6000 is a professional 6-channel headphone amplifier and distribution hub for project studios, rehearsal rooms, and live-sound rigs. Housed in a single 1U rack chassis, it routes one stereo feed to six independent monitor mixes while powering up to 12 pairs of headphones. Each channel ships with its own volume, balance, EQ, and mono switch.

Six Independent Stereo Mixes with "More Me" Control

Each of the six amplifier sections carries its own stereo AUX input, balance knob, 2-band EQ, and Mono L / Mono R switch for personalized "more me" mixes. The main input loops through to the main output, letting several units be daisy-chained for larger ensembles.

Connectivity and I/O for Any Setup

Gold-plated XLR and 6.3 mm TRS jacks cover both balanced and unbalanced connections, while the front-panel Direct In plus per-channel AUX inputs accept click tracks or extra instruments.

• Inputs: Jack 6.3 mm TRS, Balanced XLR, Balanced Jack 6.3 mm TRS — balanced line sources from mixers and stage racks
• Outputs: Headphone Jack 6.3 mm, Balanced XLR, Balanced Jack 6.3 mm TRS — parallel main out cascades additional units
• Headphone Output Ports: Yes (12 total, 2 per channel) — front and rear jacks run simultaneously

Output Power That Drives Any Headphone

Rated for headphones down to 8 ohms, the amplifier stage delivers up to 1000 mW into 30 ohms, 260 mW into 300 ohms, and 140 mW into 600 ohms — enough headroom for both IEMs and high-impedance studio cans.

• Headphone Output Power: 1000 mW @ 30 ohms / 260 mW @ 300 ohms / 140 mW @ 600 ohms — clean level for IEMs and studio cans
• Minimum Headphone Impedance: 8 ohms — works with virtually any headphone
• Dynamic Range: 101 dB (22 Hz–22 kHz) — quiet floor with sensitive in-ears

Rack-Ready Build with Per-Channel Tone Shaping

A 1U steel chassis slides into any 19" rack, and the universal switching power supply accepts 100–240 VAC for international touring. Per-channel bass and treble controls (cut/boost at 80 Hz and 12 kHz) tame harsh cymbals or muddy low end.

• Channels: 6 independent stereo amplifiers — six personalized mixes from one unit
• EQ per Channel: 2-band (bass below 80 Hz, treble above 12 kHz, ±12 dB) — quick tone fix per listener
• Form Factor: 19" / 1U rackmount, 48.3 × 15 × 4.3 cm, 2 kg — light enough for mobile rigs