Vox amPhones AC30Kitarski ojačevalec za slušalke Koda izdelka: AMPHONES-AC30 Compact closed-air active dynamic bass headphones with analog circuitry and built-in effects from amPlug series that provide a top boost sound of the legendary custom valve guitar amplifier AC30. They feature a built-in amPlug technology with amplifier simulator that allows plugging them directly into the instrument, as well as headphone technology from Audio-Technica so they can be used as conventional headphones when the amplifier simulator is switched off. Amp section provides maximum output of 1.4 V, dial controls (Gain, Tone, Volume, Effect) and a switch for Standby mode. Headphones are equipped with 40 mm drivers that provide frequency range of 20 Hz-20 kHz and output sound pressure level of 97 dB. They provide a bass guitar input and aux input, and 1.3 m long cable. When using as the amplifier simulator, two AAA batteries are required for operation (included). 3.5 mm to 6.3 mm plug adapter is included. Maximum output: 1000 mV. Impedance: 49 Ohm. Dimensions: 195 x 160 x 50 mm. Weight: 230 g. Brown, silver and black colour combination.Na zalogi spletne trgovine 2 kos
IK Multimedia iRig HD 2Kitarski ojačevalec za slušalke Koda izdelka: IRIG-HD-2 iRig HD 2 gives you a totally new level of mobile playability with intuitive new player-centric features like high-quality 24-bit/96kHz audio, an integrated headphone out with level control, a new Amp out jack with switchable output, full versions of AmpliTube for Mac, PC &amp;amp;amp; iOS, plus total mobility and connectivity for playing anywhere, any time. iRig HD 2 fits easily in your pocket and connects directly to your Lightning and USB devices – so no matter which iPad, iPhone, Mac or PC you have, you’re ready to rock at a moment’s notice. There’s no complicated setup – just plug in and play. First and foremost, iRig HD 2 simply sounds amazing. It features superior digital audio quality with premium 24-bit A/D converters and a 96 kHz sample rate — the highest in its class — for a crystal clear digital signal that’s free from noise and crosstalk. This pure high resolution conversion lets your guitar’s natural performance tone come through loud and clear when playing and recording on your iPad, iPhone, Mac or PC. It’s super-transparent preamp ensures that every nuance — from the pickups, wood tone, string size, nut material, electronics, and every other reason you picked “that” guitar in the first place — is accurately communicated to your device with zero coloration or interference. And because of it’s 96kHz sample rate, the depth and clarity of your sound will simply floor you — iRig HD 2 sounds amazing. One of the things that makes the iRig HD 2 unique is the ability to send your processed signal directly to a guitar amp without the need for special conversion adapters. iRig HD 2 features an unbalanced 1/4" Amp Out jack that you can use to send your processed or unprocessed guitar signal to an external amplifier, floor tuner or completely different rig setup for live performance. The Amp Out jack features a dual mode switch allowing you to choose what type of signal you want to send to your amp. The “FX” setting sends your processed signal, or the sound coming out of your software/app to the external device. This is perfect when you want to use your iPad or Laptop as your effects pedalboard, your amp’s front end or complete tone rig in a live setting. The “Thru” setting sends your guitar’s dry, unprocessed signal directly to the out jack, allowing you to use a floor-based or rack tuner, a pedalboard or even an additional full-on stage rig. Plus as an added performance feature, iRig HD 2 has an integrated microphone stand “clip” and Velcro strap so you can secure it to a mic stand on stage for live performance. If you’re contemplating upgrading to the latest and greatest iPhone, then listen up. iRig HD 2 sports a new 1/8" (3.5mm) headphone jack with preamp and level control integrated into the unit so you can monitor your recording and playing… even if your device doesn’t feature a headphone jack. Pretty smart. But this is no ordinary standard “headphone” jack — it features a high-resolution headphone preamp that optimizes the audio signal for full range playback and monitoring. You can also use this output to send a stereo signal out to a mixing console or a pair of powered monitors like iLoud Micro Monitor.iRig HD2 feaures:High definition digital guitar interface for iPhone, iPad, Mac and PCHigh-quality instrument-level 1/4" Hi-Z input jackDetachable cables for Lightning and USB includedPreamp input gain controlHeadphone output with preamp and level control1/4" Amp Out jack with switchable output “FX” and “Thru”High-quality low-noise, high-definition guitar preampHigh-quality 24-bit A/D conversion96kHz sampling rate – the highest in its classPowered by the iOS device or USBCan be used with line level signals from synthesizers, keyboards and mixersUltra-compact and lightweight – fits in your pocket, laptop bag or gig bagComes with microphone stand mounting clip and Velcro stripComes with AmpliTube 4 for Mac/PCUnlocks full version features and gear of AmpliTube for iOS (Free download from App Store)Na zalogi spletne trgovine več kot 5 kos
IK Multimedia iRig Acoustic StageKitarski ojačevalec za slušalke Koda izdelka: IRIG-ACOUSTIC-STAGE The advanced digital microphone system for acoustic guitar. iRig Acoustic Stage is the new hi-tech solution for accurately reproducting the full sound of acoustic guitars and other instruments with studio-quality sound live on stage and in the studio. The combination of its advanced MEMS microphone and hi-quality preamp and DSP processing unit provides - for the first time ever - a break-through solution that offers hi-quality natural sound, advanced features, ease of installation and a convenience never seen before. Until now, getting your acoustic to sound like it does in the studio when playing on stage has been a difficult, if not impossible, task. Playing an acoustic on stage typically falls into two scenarios: using the onboard piezo or magnetic pickup system to project a fractional representation of your acoustic's natural warm tone, or sitting stationary on stage with microphones in "the sweet spot" on your acoustic, dramatically limiting your ability to move. With iRig Acoustic Stage, you no longer have to sacrifice great acoustic tone when playing live. iRig Acoustic Stage gives you the best of both worlds - the beautiful, rich sound of your acoustic guitar as if it were mic'd up in the studio AND the freedom to move around without compromising your sound. Sound impossible? iRig Acoustic Stage is a patented, revolutionary digital microphone system that makes your guitar sound exactly as if it was captured with a classic recording studio setup, giving you full rich studio-quality sound on the stage. It's a compact acoustic microphone and advanced digital preamplifier and processing unit that recreates a studio microphone set-up providing you with all of the true character and tonal nuance of your acoustic in live playing situations. Simply clip the iRig Acoustic Stage's microphone to the sound hole, attach it to the iRig Acoustic Stage pre-amplifier processor, then connect the preamp to your amplifier or mixer. iRig Acoustic Stage also features a "Cancel Feedback" button that gets rids of annoying frequency feedback during performance. Once installed and active, you'll immediately hear what you've been missing with your traditional live setup as your acoustic tone comes alive with vibrance, warmth, depth and earthy, woody tone. If you currently perform with an acoustic-electric, iRig Acoustic Stage can greatly enhance your guitar's live tone. iRig Acoustic Stage features an AUX input with a blend control that lets you blend your guitar's current pickup system with iRig Acoustic Stage giving you even greater tonal flexibility and a roundness to your sound like you've never heard before. iRig Acoustic Stage provides an enhanced acoustic sound that's perfect for live performance and recording. Getting that "studio" sound in project or home studios with your acoustic is now easier than ever. If you have an audio interface, simply plug iRig Acoustic Stage into the analog input. No interface? No problem! iRig Acoustic Stage also features an integrated class-compliant USB audio output for direct connection to your computer or compatible device. Not only will you get that fantastic sound, but you can also move around freely allowing you to get into the groove and capture your best acoustic performance in your studio.Na zalogi spletne trgovine več kot 5 kos
IK Multimedia I RIG ProKitarski ojačevalec za slušalke Koda izdelka: IRIG-PRO Ultra-compact all-in-one audio/MIDI interface for iPhone, iPad or Mac that can be connected to studio XLR microphones, instruments, keyboards or MIDI controllers. It features a balanced input for connecting microphones and unbalanced input for line-level or Hi-Z source via XLR/1/4” combo jack (accepts XLR and 1/4" TS cables), and a MIDI input for plugging into the controller (compatible with iRig MIDI cables). Interface provides a high-quality 24-bit/96 kHz conversion and +48V phantom power for connecting condenser microphones provided by included 9 V battery. It is also equipped with a high-quality low-noise high-definition mic and instrument preamp with Gain control, and a sturdy, durable construction. Interface come with a complete suite of music-making software and apps – for Mac: AmpliTube Metal, T-RackS CS Classic mastering suite, SampleTank 3 SE sound workstation, and for iOS: AmpliTube FREE, SampleTank FREE, and iGrand Piano FREE. Interface is powered by mobile device or USB when plugged into Mac. Lighting, USB and MIDI cables are included. Dimensions: 32 x 105 x 32 mm. Weight: 40 g.Na zalogi spletne trgovine 1 kos
IK Multimedia iRig UAKitarski ojačevalec za slušalke Koda izdelka: IRIG-UA -Na zalogi spletne trgovine 2 kos
Vox amPhones Twin
Kitarski ojačevalec za slušalke / Koda izdelka: AMPHONE-TWIN / ID: 207178
Vox amPhones Twin:Closed-air dynamic headphones from amPhones series that feature a built-in amPlug technology, originally found on the palm-sized headphone guitar amplifiers. These headphones can be plugged directly in the instrument, allowing the user to enjoy the clean sound of a classic US-made amplifier. They are created using headphone technology from Audio-Technica, the trusted headphones manufacturer. They can also be used as conventional headphones when the amplifier simulator is switched off. The headphones are equipped with 40mm drivers, providing playback frequency range of 20 Hz to 20 kHz, output sound pressure level of 97 dB and maximum input of 1000 mV. The amplifier section offers Dials (Gain, Tone, Volume, Effect) and Switch (Standby) controls, standard guitar input and an aux input. The amplifier section requires two AAA batteries for operation. The headphones feature a 1.3m long cable and come supplied with batteries and a 3.5mm-to-6.3mm plug adapter. Impedance: 49 Ohm. Dimensions: 195 x 160 x 50 mm. Weight: 230 g.
Recenzije izdelkov:Vox amPhones Twin
Imate Vox amPhones Twin, ali ste ga že uporabljali?
Napišite recenzijo in delite svojo izkušnjo ter mnenje z ostalimi