MusicNomad MN861 Replacement Tracers Pads Orodje za vzdrževanje kitare
Znamka: MusicNomad
Koda izdelka: 1313195
Znamka: MusicNomad
Koda izdelka: 1313195
MusicNomad MN861 Replacement Tracers Pads Orodje za vzdrževanje kitare
The MusicNomad MN861 Replacement Tracers Pads are four Micro-Mesh polishing loops designed to refresh the fret-finishing system on any MusicNomad Tracers handle. Each pad is marked with its grit number (1, 2, 3, 4) so the polishing sequence stays obvious during a setup. Cushioned abrasive technology bonds floating crystals to a flexible cloth backing, giving a controlled cut on nickel, Evo Gold and stainless steel frets without scratching the board. A 13 square inch (84 cm²) working surface lets a single loop cover a full neck pass before it wears out.
- To cover the full fret-polishing workflow from scratch removal to mirror shine, there are four Micro-Mesh loops available in grits 1000, 3600, 6000 and 12000.
- Slides onto both MusicNomad Tracer handles, replacing worn pads in seconds without tools.
- Works on acoustic, electric, bass, banjo and ukulele frets across the most common fret materials.
- Compact 7.6 × 1.3 × 12.7 cm pack stores easily in a tech's case or drawer.
MusicNomad MN861 Replacement Tracers Pads – keep your fret polish workflow sharp
The MusicNomad MN861 Replacement Tracers Pads are the official refill set for the Tracers Fret Finishing Kit. Four Micro-Mesh polishing loops, marked 1 through 4, slide onto either Tracer handle to restore the four-step polishing sequence (1000, 3600, 6000, 12000 grit) after the originals wear down.
What to look for in a fret-polishing refill
You need confirmed compatibility with your Tracers handle, the correct grit sequence for crowning-through-mirror-shine work, and a flexible cushioned abrasive that will not dish out the fret crown. MN861 checks all three, making it the factory-authorized refill for the MusicNomad system.
Dokumenti
Varnostna navodila
Ustrezna varnostna navodila za izdelek glej navodila za uporabo.
